TZM

TZM

Introduce(detail):
Molybdenum has several alloys. For the purpose of this brochure, only alloys that are predominantly molybdenum will be considered.

TZM (titanium, zirconium, molybdenum)
Molybdenum's prime alloy is TZM. This alloy contains 99.2% min. to 99.5% max. of Mo, 0.50% Ti and 0.08% Zr with a trace of C for carbide formations. TZM offers twice the strength of pure moly at temperatures over 1300'C. The recrystallization temperature of TZM is approximately 250'C higher than moly and it offers better weldability.

The finer grain structure of TZM and the formation of TiC and ZrC in the grain boundaries of the moly inhibit grain growth and the related failure of the base metal as a result of fractures along the grain boundaries. This also gives it better properties for welding. TZM costs approximately 25% more than pure molybdenum and costs only about 5-10% more to machine. For high strength applications such as rocket nozzles, furnace structural components, and forging dies, it can be well worth the cost differential.

TZM is available in sheet and rod form in basically the same size range as moly with the exception of thin foil. Rembar is experienced in the fabrication of TZM. Refer to the separate TZM sheet.

Moly/30% Tungsten
This is another moly alloy that offers unique properties. It was developed for the zinc industry. This alloy resists the corrosive effects of molten zinc. Mo/30W has also proved effective in rocket nozzles and has the potential of offering enhanced performance in applications where any erosive effects are a factor.

Moly/50% Rhenium
This alloy offers the strength of moly with the ductility and weldability of rhenium. It is a costly alloy and it is only available in a very limited size range. It offers significant advantages in thin foil applications for high temperature delicate parts, especially those that must be welded. Note that, although this alloy is nominally 47% rhenium, it is customarily referred to 50/50 moly/rhenium. Other moly/rhenium alloys include moly/rhenium sheet with 47.5% and 41% rhenium. The moly/41%Re alloy does not develop sigma phase. This makes the material even more ductile after exposure to high temperatures.

买平特四连肖 河南481新开奖视频 福彩6十1牛材网 天津十一选五官网 北京十一选五一定牛北京选五一定牛 陕西快乐十分基本走势图 广东快乐10分钟走势图表 股票大盘走势图 体育彩票大乐透开奖直播 黑龙江十一选五遗漏统 宁夏11选5哪里可以投注 体彩超级大乐透玩法 彩票走势图怎么看能懂 手头闲钱10万怎么理财 安徽十一选五一定牛开奖结果 快乐十分前三直选方法 评论赚钱2元一条